Roadway-lighting RFQ guide
Curved Light Poles: Davit-Arm Geometry and RFQ Inputs
A curved light pole is not defined by the curve alone. Send the roadway layout, pole location, lighting direction, davit-arm concept, luminaire interface, base condition and finish reference together so the quotation can describe the supplied configuration instead of filling gaps with assumptions.
This is a buyer and engineering-input guide. It does not establish structural capacity, lighting design, electrical design, foundation design, installation method, safety controls or authority approval.
The short answer: review the curve as an equipment interface
The shaft, curved arm and luminaire position form one proposed assembly. The RFQ must make clear which fixture or bracket is known, where the light should sit relative to the roadway or site plan, which direction the arm faces and which items still require project confirmation.
A visual streetscape reference can help select a silhouette. It does not establish final pole height, reach, luminaire mass, projected area, mounting interface, cable route, base condition or clearance. Keep those inputs visible in the quote and drawing review.
Layout
Latest plan, pole locations, quantity, roadway or area context, curb/grade reference and clearance constraints.
Arm and luminaire
Curved/davit-arm intent, luminaire or bracket model/status, mounting interface, orientation, elevation and supplied-by party.
Base and release
Known base or installation concept, cable/access information, finish, site access, scope, open items and required review route.
What to send for a curved light pole RFQ
A compact input package avoids treating a concept image as a fabrication instruction.
| Project layout | Roadway, pathway, parking or campus plan; pole locations, quantities, section or elevation references, grade/curb context and known constraints. |
|---|---|
| Pole geometry | Preferred height direction, shaft/profile, curved or davit-arm direction, approximate outreach intent, pole-top arrangement and required accessories. |
| Luminaire interface | Known fixture model/data or a clearly marked placeholder; mounting interface, orientation, mass/projected-area information when available, cable/connector details and supplied-by party. |
| Installation interface | Base plate, direct-burial or other known installation direction; cable entry/access details, civil status, finished-grade reference and responsibility for final review. |
| Finish and appearance | Material/finish direction, color or surface reference, site exposure, close-view expectations, sample/approval route and handling constraints. |
| Scope and release | Included items, exclusions, delivery assumptions, drawing revision, open items, reviewers and the route to final production release. |
Start with the light position, then confirm the pole interface
For a roadway project, first show where the luminaire is intended to sit and which direction it faces. The curved arm is then reviewed as part of the proposed equipment interface. This sequence avoids a common gap: approving a pole silhouette before the fixture, orientation and site layout are understood.
Where the luminaire is not selected, describe the information still needed rather than implying a final bracket or arm. Designated project parties can then complete the applicable lighting, structural, electrical, civil, installation, maintenance, safety and authority checks.
A practical four-stage review
Separate an RFQ concept from the document used to release supply.
| 1. RFQ concept | Share layout, quantity, pole and arm intent, luminaire status, finish reference, site constraints and open items. |
|---|---|
| 2. Proposed configuration | Review the proposed shaft, curved-arm geometry, luminaire interface, access/base direction, supplied scope, documents and assumptions. |
| 3. Designated review | Responsible project parties resolve or accept equipment, site, engineering, installation, safety and authority inputs through their required process. |
| 4. Controlled release | Release only the agreed revision with confirmed configuration, supplied scope, finish/sample route and documented open-item resolution. |
Common curved-arm RFQ gaps
These coordination gaps are worth resolving before fabrication or finish work begins.
A render used as fixture data
A visual reference does not confirm a fixture model, mounting interface, orientation, load data or final arm geometry.
Arm direction not tied to layout
Show the pole location and luminaire direction on the current site plan; do not infer it from a generic streetscape image.
Base condition assumed
Keep civil, grade, cable and installation interfaces visible. A typical detail is not final site instruction.
Finish chosen without approval route
Record the material/finish direction, reference or sample route, exposure and acceptance process.
Related guides
Use these pages to prepare the connected information behind a roadway-lighting package.
Source references
These official public resources provide general roadway-lighting and ancillary-structure context. They do not replace project-specific structural, lighting, electrical, civil, installation, safety or authority requirements.
FAQ
What should a curved light pole RFQ include?
Include the roadway or site layout, quantity, mounting-height direction, curved-arm or davit-arm concept, luminaire and bracket data, orientation, base or installation interface, finish, cable/access details, site constraints and project-review route.
Is a curved arm only a visual choice?
No. The curved-arm geometry connects the shaft, the luminaire position and the project layout. It should be reviewed with the applicable equipment, structural, lighting, civil, installation, maintenance, safety and authority requirements.
Can a supplier quote from a streetscape image?
An image can communicate design intent, but it does not confirm the luminaire interface, reach, orientation, wind input, base interface, cable route, clearances or final project requirements. Supply a layout and label open items.
Who confirms the final curved light pole arrangement?
Responsible project parties confirm final structural, lighting, electrical, civil, installation, maintenance, safety and authority requirements. An RFQ guide or supplier quotation does not replace that review.
Send a Curved Light Pole RFQ Package
Send the latest plan, locations and quantity, curved-arm and luminaire direction, known equipment data, base/cable notes, finish reference, site constraints, supplied scope and open items. We can use them to prepare an RFQ discussion and proposed configuration.
Leave a Reply