Product family
Split-Type Solar Light Pole
Better when panel placement, battery box and luminaire position need more flexibility. Use this page for shortlisting. Final engineering details depend on project data.
Category: Solar Light Poles. Specifications: Project-dependent and subject to engineering confirmation.
Specification range
These values are a quotation starting point. Final dimensions, material notes and hardware details need project review.
| Material | Steel or aluminum options |
|---|---|
| Typical height range | 4-10 m / 13-33 ft typical range |
| Shaft / structure | Separate solar panel and luminaire configuration |
| Mounting | Base plate or embedded mounting to be reviewed |
| Finish | Finish selected by material, site exposure and solar hardware layout |
| Status | Specifications are project-dependent and subject to engineering confirmation |
Where this family fits
Unknown solar equipment is fine at the first step. Mark it as unknown instead of leaving it blank.
Good fit
Better when panel placement, battery box and luminaire position need more flexibility.
Watch first
Panel bracket and battery box location can change both wind area and service access.
Send with enquiry
Panel size, battery box size, luminaire datasheet and preferred cable route.
Details to settle
These are the questions that usually decide whether the first shortlist is useful.
Solar hardware
Panel bracket and battery box location can change both wind area and service access.
Service access
Battery and controller access need a real position, not just a clean render.
Orientation
Panel direction, road or path layout and fixture aim should be checked at the same time.
Open items to confirm
Cable route, access openings and bracket details stay under review.
RFQ notes
Send the known items and mark anything still undecided. A clear unknown is better than a silent field.
| Contact | Name plus email or WhatsApp. The RFQ form accepts either contact route. |
|---|---|
| Project brief | Where the pole will be installed and what it needs to carry. |
| Product direction | Split-Type Solar Light Pole. Material: Stainless Steel / Aluminum Alloy. If unsure, say what part is uncertain. |
| Send first | Panel size, battery box size, luminaire datasheet and preferred cable route. |
| Site notes | Panel dimensions, battery location, controller location, luminaire data, site country and service access needs. |
| Documents | Drawings, fixture datasheets, marked photos, finish references and packing requirements. |
Nearby options
If this family is close but not right, compare the neighbouring product families in the same category.
All-in-One Solar Light Pole
A compact solar direction when the panel, battery and light are expected to stay close together.
Double-Arm Solar Roadway Pole
For solar roadway layouts that need lighting on both sides or a wider coverage plan.
Solar Garden Light Pole
A solar garden direction for paths, parks and outdoor areas where grid power is limited.
Request Product Engineering Review
Share project location, product type, height, material preference, luminaire EPA and weight, finish, drawings and any packing or inspection requirements.
Model-specific selection focus
Split-Type Solar Light Pole: what to confirm
For a split-type solar lighting, the quotation discussion is stronger when the project brief identifies the intended application, requested appearance and installation context.
- separate component layout
- PV orientation and equipment location
- cable routing and access requirements