Product family
Square-Shaft Street Light Pole
A flat-sided street pole direction for clean architectural or municipal layouts. Use this page for shortlisting. Final engineering details depend on project data.
Category: Roadway Light Poles. Specifications: Project-dependent and subject to engineering confirmation.
Specification range
These values are a quotation starting point. Final dimensions, material notes and hardware details need project review.
| Material | Steel or aluminum options |
|---|---|
| Typical height range | 4-10 m / 13-33 ft typical range |
| Shaft / structure | Square-shaft street light pole |
| Mounting | Base plate, anchor bolt or embedded mounting to be reviewed |
| Finish | Galvanizing, powder coating or anodizing depending on material and exposure |
| Status | Specifications are project-dependent and subject to engineering confirmation |
Where this family fits
If the pole replaces an old one, a photo of the base and hand hole saves a lot of guessing.
Good fit
A flat-sided street pole direction for clean architectural or municipal layouts.
Watch first
Confirm hand-hole face, fixture orientation and finish because the faces are easy to read visually.
Send with enquiry
Shaft face preference, fixture orientation, height, material and finish reference.
Details to settle
These are the questions that usually decide whether the first shortlist is useful.
Road layout
Confirm hand-hole face, fixture orientation and finish because the faces are easy to read visually.
Load data
EPA, fixture weight and bracket reach decide the drawing review.
Foundation interface
Base plate, anchor bolts or embedded section should follow the site condition.
Open items to confirm
Wall thickness, base plate, anchor bolts and final finish notes until fixture and site data are checked.
RFQ notes
Send the known items and mark anything still undecided. A clear unknown is better than a silent field.
| Contact | Name plus email or WhatsApp. The RFQ form accepts either contact route. |
|---|---|
| Project brief | Where the pole will be installed and what it needs to carry. |
| Product direction | Square-Shaft Street Light Pole. Material: Stainless Steel / Aluminum Alloy. If unsure, say what part is uncertain. |
| Send first | Shaft face preference, fixture orientation, height, material and finish reference. |
| Site notes | Road type, target height, fixture datasheet, arm reach, mounting line and destination country. |
| Documents | Drawings, fixture datasheets, marked photos, finish references and packing requirements. |
Nearby options
If this family is close but not right, compare the neighbouring product families in the same category.
Tapered Octagonal Roadway Light Pole
A practical first choice when buyers want a straight utility look with flat shaft faces.
Round Conical Roadway Light Pole
Good for projects that want a cleaner round profile without decorative parts.
Curved-Arm Roadway Light Pole
Useful when the arm shape is part of the street appearance, not just a support bracket.
Request Product Engineering Review
Share project location, product type, height, material preference, luminaire EPA and weight, finish, drawings and any packing or inspection requirements.
Model-specific selection focus
Square-Shaft Street Light Pole: what to confirm
For a square-shaft roadway form, the quotation discussion is stronger when the project brief identifies the intended application, requested appearance and installation context.
- shaft profile and visual intent
- arm mounting arrangement
- baseplate and anchor interface