Product family
Direct-Burial Street Light Pole
A street pole direction when the embedded section is part of the mounting discussion. Use this page for shortlisting. Final engineering details depend on project data.
Category: Roadway Light Poles. Specifications: Project-dependent and subject to engineering confirmation.
Specification range
These values are a quotation starting point. Final dimensions, material notes and hardware details need project review.
| Material | Steel or aluminum options |
|---|---|
| Typical height range | 4-10 m / 13-33 ft typical range |
| Shaft / structure | Direct-burial street light pole |
| Mounting | Embedded section and soil/foundation condition to be reviewed |
| Finish | Galvanizing, powder coating or anodizing depending on material and exposure |
| Status | Specifications are project-dependent and subject to engineering confirmation |
Where this family fits
If the pole replaces an old one, a photo of the base and hand hole saves a lot of guessing.
Good fit
A street pole direction when the embedded section is part of the mounting discussion.
Watch first
Soil and civil assumptions matter more here than on a simple base-plate enquiry.
Send with enquiry
Embedment expectation, site condition notes, pole height, fixture data and corrosion exposure.
Details to settle
These are the questions that usually decide whether the first shortlist is useful.
Road layout
Soil and civil assumptions matter more here than on a simple base-plate enquiry.
Load data
EPA, fixture weight and bracket reach decide the drawing review.
Foundation interface
Base plate, anchor bolts or embedded section should follow the site condition.
Open items to confirm
Wall thickness, base plate, anchor bolts and final finish notes until fixture and site data are checked.
RFQ notes
Send the known items and mark anything still undecided. A clear unknown is better than a silent field.
| Contact | Name plus email or WhatsApp. The RFQ form accepts either contact route. |
|---|---|
| Project brief | Where the pole will be installed and what it needs to carry. |
| Product direction | Direct-Burial Street Light Pole. Material: Stainless Steel / Aluminum Alloy. If unsure, say what part is uncertain. |
| Send first | Embedment expectation, site condition notes, pole height, fixture data and corrosion exposure. |
| Site notes | Road type, target height, fixture datasheet, arm reach, mounting line and destination country. |
| Documents | Drawings, fixture datasheets, marked photos, finish references and packing requirements. |
Nearby options
If this family is close but not right, compare the neighbouring product families in the same category.
Tapered Octagonal Roadway Light Pole
A practical first choice when buyers want a straight utility look with flat shaft faces.
Round Conical Roadway Light Pole
Good for projects that want a cleaner round profile without decorative parts.
Curved-Arm Roadway Light Pole
Useful when the arm shape is part of the street appearance, not just a support bracket.
Request Product Engineering Review
Share project location, product type, height, material preference, luminaire EPA and weight, finish, drawings and any packing or inspection requirements.
Model-specific selection focus
Direct-Burial Street Light Pole: what to confirm
For a direct-burial installation concept, the quotation discussion is stronger when the project brief identifies the intended application, requested appearance and installation context.
- local soil and burial detail
- transition from shaft to installation zone
- fixture and arm arrangement
Direct-bury light pole terminology and RFQ inputs
“Direct-bury light pole” is commonly used for a direct-burial pole installation, where the shaft interface is embedded rather than fixed through a base plate. A useful RFQ still needs the project layout, intended embedment/interface information, pole height, luminaire data, site conditions and the responsible review path.
Compare the two installation approaches in the direct-burial versus base-plate guide.